The Quest Scuba Tector Pro is the perfect waterproof handheld detector to take with you on vacation. With the Scuba Tector Pro you can dive to a depth of 60m underwater and with the included adapter you can easily attach a boom extension (optionally available), which also allows you to search on the beach and on land.

If you want to dive deeper than 10m, you can set the Quest Scuba Tector Pro to dive mode. This mode ensures that the 2 push buttons are not pressed due to underwater pressure. You can activate the diving device under water by moving it up and down a few times. Unlike the Scuba Tector, the Scuba Tector Pro has an additional mode button that can be used to switch it from land mode to dive mode and back again. The Scuba Tector Pro also has an additional reset button with which you can easily return to the factory settings.



The Quest Scuba Tector Pro has a built-in 1000mAh lithium battery and can be easily recharged with a USB cable. With an overall length of 43cm (folded 25cm) and a weight of 490g, the diving device fits in any pocket or suitcase and can therefore be taken on any adventure, wherever you go or stand!

Technical data

• Pulse induction technology
• Operating frequency 95 KHz
• 2 operating modes land and diving
• Total length of handle with coil 43cm
• Weight 490g
• search coil 25x9cm 180° retractable
• Integrated 1000 mAh Li-Po battery
• Battery capacity per charge approx. 14 hours
• Battery status display
• Automatic ground adjustment
• Audio, vibration, audio with vibration
• Search depth depends on object size approx. 10 - 50 cm

Included in the scope of delivery

• Quest Scuba Tector Pro Metalldetektoren
• Coil protection
• Anti-loss spiral cable with fastening screw
• Hand strap
• Rod adapter
• USB charging cable
• Underwater Fundtaschen
• 2 x Quest stickers
• Graphic instruction manual
• 2 year warranty