Two new mid-range metal detectors from XP Metal Detectors — with the proven FMF multi-frequency technology of the DEUS II, a fully wireless architecture and a newly designed operating concept for beginners and advanced users.
View technical dataAs of April 2026 — official data available. XP Metal Detectors has officially presented the XP ICON and ICON X. All technical data on this page comes directly from the official XP product data sheet. The official retail prices are available: XP ICON from €499, XP ICON X ab €599 — each without headphones.
First official teaser film from XP Metal Detectors for the new XP ICON and ICON X.
XP is launching two versions: the XP ICON is the entry model with 3 factory programs and 2 single frequencies. The XP ICON X offers 6 programs, 3 single frequencies, 7 reactivity levels and a carbon shaft. Both use FMF® technology and are fully wireless.
~845 g fully equipped (~735 g without RC)
~830 g fully equipped (~710 g without RC)
All data comes from the official XP product data sheet (April 2026).
All data from the official XP product data sheet (April 2026). Where the ICON and ICON X differ, this is indicated.
The XP ICON transfers the core technology of the DEUS II into a more accessible format — with simplified operation, new icon navigation and a fully wireless architecture.
Fast Multi-Frequency from 4 to 45 kHz — the same technology as in the DEUS II, now for the first time in XP's mid-range. Superior ground stability and precise target discrimination even in mineralised ground.
In addition to simultaneous mode, single frequencies can be selected manually — 4 and 14 kHz on the ICON, plus 28 kHz on the ICON X. Ideal for specific types of target or for suppressing electrical interference in the field.
The ICON offers 3 factory programs and 3 user programs, the ICON X 6 + 6 — ready-to-use search profiles plus freely configurable slots for your own field settings.
The coil, control unit (RCICON) and headphones communicate via XP's patented wireless protocol — 10× faster than Bluetooth and without noticeable latency.
Larger display, icon-based navigation and physical buttons instead of a touchscreen — much more accessible than previous XP models and particularly suitable for beginners.
The standard mount is compatible with XP Deus / Deus II shafts. Existing XP search coils of the DEUS II system can also be used.
Automatic and manual ground balance for mineralised ground. The signal processing speed can be set separately — important on ground densely littered with junk.
Separate volume control for iron signals — indispensable for experienced detectorists to keep iron audible without discriminating out useful targets.
The audio response is configurable — pitch, threshold and multi-tone options allow precise target differentiation by ear, as you are used to from XP detectors.
A dedicated button allows an instant switch to all-metal mode — practical in the field when you want to hear an interesting signal undiscriminated for a moment.
Integrated battery with a modern USB-C connector. No proprietary charger needed — a clear convenience advantage over older XP models.
The RCICON can be connected to a PC with a USB-C data cable to install firmware updates — XP actively maintains its detectors through software updates.
With the ICON, XP enters the competitive mid-range market — and for the first time positions itself directly against detectors under 800 euros.
XP explicitly describes the ICON as the “lighter, more accessible little brother of the DEUS II”. While the DEUS II occupies the professional segment, the ICON is meant to bring the same FMF® technology into a lighter, more intuitive and more affordable package — without compromising on depth and precision.
The ICON breaks with XP's previous philosophy of the miniaturised remote control. The wider display, icon-based menu navigation and directly printed VDI scale are conceptually similar to the Garrett Apex — accessible for newcomers without sacrificing professional functions.
The ICON is fully compatible with the DEUS II FMF coils: D22FMF (22.5 cm), DELLFMFHP (HF2, 24×13 cm), D28FMF (28 cm) and D3428FMF (34×28 cm). The ICON's standard coil has a diameter of 28 cm and weighs ~370 g incl. protective ring.
The ICON competes with the Nokta Score, Minelab X-Terra PRO and Garrett Vortex — all multi-frequency detectors under 800 euros. The DEUS II's FMF system in this price class is a clear unique selling point.
On the ICON, too, the coil, remote control and headphones remain separate components. The XP digital protocol connects all parts with a latency of only ~4 ms over 36 automatic channels in the 2.4 GHz band — without cables and without noticeable delay.
XP has officially qualified the ICON for Longtime® certification — a recognised award for durability, reparability and long-term manufacturer support. Firmware updates, a 5-year warranty and an openly documented ecosystem underline this claim.
From the trademark application to the market launch — all known dates at a glance.
SARL XPLORER registers the name “ICON” with the USPTO (serial number 98593063) — the first official indication of the project.
The device passes US FCC certification under the code XFJRCICON. The technical development is thus considered officially completed — a market launch moves within reach.
Pictures from the FCC documents and early test reports are shared in international forums — the community reacts with great interest and lively discussion about price and positioning.
Contrary to community expectations, there was no world premiere at the Detectival festival in England. XP did not present the ICON publicly. At the same time, XP confirmed internally that the leaked photos had been revised.
An initially expected market launch for the 2025 Christmas season did not happen. XP stuck to its revisions and announced “interesting surprises”.
XP Metal Detectors publishes an official teaser film for the XP ICON and ICON X. Both models are presented as affordable, powerful and easy to use. The detector is thus officially confirmed by the manufacturer.
XP has published the official prices for all four configurations. The ICON and ICON X are available in our shop.
Comparison of the most important features with current mid-range detectors (all information based on publicly available sources, as of April 2026).
| Feature | XP ICON / ICON X | Nokta Score | Minelab X-Terra PRO | Garrett Vortex |
|---|---|---|---|---|
| Multi-frequency | ✓ FMF (4–45 kHz) | ✓ SMF | ✓ Multi-IQ | ✓ MSF |
| Fully wireless | ✓ Yes, all parts | ~ Optional | ~ Optional | ~ Optional |
| IP68 waterproof | ✓ IP68 · 5 m (with BH-02) | ✓ IP68 | ✓ IP68 | ~ IP66 |
| USB-C charging | ✓ Yes | ✓ Yes | ✓ Yes | ✗ No |
| Compatible with pro coils | ✓ Deus / Deus II | ~ Nokta ecosystem | ✗ No | ~ Garrett ecosystem |
| Target price (approx.) | 499 € / 599 € (ICON X) | ab approx. 379 € | approx. 449 € | approx. 499 € |
| Country of origin | France | Turkey | Australia | USA |
XP has officially announced the retail prices for all four configurations. All prices incl. VAT.
Without headphones
Control unit + coil + shaft
To the shopWith wireless stereo headphones
Incl. WSA ST wireless headphones
To the shopWithout headphones
Carbon shaft, 6 programs, 28 kHz
To the shopWith wireless stereo headphones
Full set incl. WSA ST wireless headphones
To the shopThe WSA ST is XP's wireless stereo headphone with the patented XP digital protocol (~4 ms latency). Stereo audio morphing allows spatial target location by ear — a real advantage, especially on junk-littered ground. The extra 100 € compared with the version without headphones is clearly recommended.
XP grants a 5-year warranty on parts and labour for the ICON and ICON X — optionally extendable. As an authorised XP dealer, we are your contact for warranty handling and service in Germany, Austria and Switzerland.
Not sure which configuration suits you? We give you honest advice — without sales pressure. By detectorists, for detectorists.
From the outset, the ICON has been designed as part of the XP ecosystem. It grows with your experience — and with your accessories.
All DEUS II FMF search coils work directly on the ICON: the 22.5 cm coil (D22FMF), the elliptical HF2 coil (24×13 cm), the 28 cm standard coil (D28FMF) and the large 34×28 cm coil (D3428FMF). If you already own a DEUS II, you can continue to use its coils directly.
All XP wireless headphones (WSA ST and others) are compatible — including stereo versions (WSA ST). The wireless headphones are not waterproof; the BH-02 bone conduction headphones are required specifically for underwater use (IP68, 5 m, 30 min) and come with a waveguide.
The XP MI-6 pinpointer connects wirelessly to the ICON and offers audio and vibration modes as well as a loss alarm. Combined with the ICON, this creates a fully wireless search system — from the search coil to the pinpointer.
The free XP Go Terrain app connects to the ICON and enables GPS route recording, find logging and analysis directly on your smartphone. Every session can be documented and shared with the community.
XP holds the Longtime® certificate for the ICON — a recognised award for durability, reparability and long-term manufacturer support. This means spare parts, firmware updates and repairs will be offered for many years.
XP grants a 5-year warranty on parts and labour for the ICON and ICON X, optionally extendable. Batteries and accessories are covered for 2 years. To activate the full warranty, the detector must be registered online with XP after purchase.
All technical data is based on the official XP product data sheet (April 2026) and the official XP product page. Earlier community reports and FCC leaks served as preliminary work and have been replaced by official data.
Metalldetektoren.de
Andreas Licht
Professor-Derra Str. 3
96465 Neustadt b. Coburg
Germany
